 |
 telephone: +44 (0) 1789 295284 |
|
| Click
here for www.lbpower.com |
|
Technical Specifications +FLEX EPR / CSP COIL LEAD to BS 6195, TYPE 4, HOFR Application: This range of affordable, double insulated, Type 4C cables is specifically designed for: Terminating: directly onto coil windings on electrical motors and generators. Site power distribution: under harsh environments where flexibility and mechanical strength is required. Power interconnections: between motor starters, rectifiers, controllers, load bank hook-ups, electrical control panels etc. Use in confined spaces where a high level of flexibility and ease of handling is paramount. Permanent or temporary power distribution purposes on site particularly when harsh and unfriendly environments are likely to be encountered. Key Features: Flexibility. The elastomeric properties of the insulation material, coupled with the use of tinned copper conductors make +FLEX cable very pliable – far less rigid than equivalent tri-rated cable but with the added benefit of double insulation and a robust outer sheath. This makes +FLEX ideal for: Double Insulation. The insulation does not support combustion and has good mechanical properties and anti-abrasion characteristics. +FLEX is resistant to heat and oil and other common solvents. Voltage Category. The standard product supplied is 0.6 –1kV rated but 11kV cable is also available.
Conductors: Tinned Annealed Copper. EPR / CSP Insulated (Heat and Oil Resistant, Flame Retardant) with a maximum conductor operating temperature of +90 degrees celsius. Size
Range: From 1.5mm2 to 400mm2
(30 to 1085 Amps) in 17 steps.
|